|
Post by necro on Feb 25, 2015 22:48:58 GMT
So I was messing with driving setups and i found a really easy way to control. This works because forwards takes priority over backwards Set all wheels to have Reverse as UP Arrow, so this will run backwards, keep that in mind when building. Set your forward on the wheels to RIGHT/LEFT Arrows depending on which side you set them on, if you get it wrong just swap them Ends up in these Controls: -UP to go forward. -UP + tap LEFT/RIGHT to go left/right or Hold both to spin in place. -Then LEFT/RIGHT to go backwards. If your confused I can provide pics/video...but this is really simple to test. If you can't be bothered here is the wheel set up. SimpleExample.bsg (759 B)
|
|
|
Post by runningbiscuit on Feb 26, 2015 3:19:54 GMT
I'll have to try this setup sometime. I personally use the numpad 4/1 for left wheels and 5/2 for right wheels. Great handling, but, it is very sensitive to user inputs
|
|
|
Post by necro on Feb 26, 2015 4:00:23 GMT
Buggy_Necro.bsg (7.72 KB) I Made a more in depth buggy using this method. Full suspension, clearance control, front and back wheel tilt. (Num Row) - 1/2 = clearance front (Num Row) - 3/4 = clearance Back (Num Pad) - 1/2 = Left/Right Wheel Base (Num Pad) - 7/8 = Tilt Front (Num Pad) - 4/5 = Tilt Back UP = Forward UP + tap right/left = Turn left/right Left + Right = Back L = Tighter Suspension
|
|